Size: body 24cm, Colors: White+Blue, Black+Red,Pink+White,Black+Black Description: Rated power: 300 watts, Rated voltage: 110 volts, Product features: heating tools, which can be used to heat embossed powder and heat shrinkable film. Instructions: 1. Plug in the power supply and turn on the switch. 2. Keep a distance of 3-5cm from the work and heat it at an angle of about 45 degrees until the work is completed. 3. Turn off the power and wait for it to cool down Note: The heat gun has a high temperature, so be careful of burns when using it. You can directly blow hard with a hot air gun to make small soft pottery works. After baking, use a hot air gun to blow at high temperature for a few minutes, not only can it be hardened but also brightenedGreat! This hot air gun cannot be adjusted in temperature. Theoretically, the muzzle can reach about 200° within a few seconds. Do not stop for more than 10 minutes and then blow again. The angle is about 45 degrees to prevent the heat from sucking back. Suitable for customers who do not have an oven or have no conditions to purchase an oven, this hot air gun is a great choice! The temperature can't be adjusted but it heats up quickly . It can reach at about 200°C/390°F within a few seconds. Mini hot air gun is a perfect tool for DIY craft works. It can be used for embossing powder, heat-shrinkable film, clay, bump, rubber stamp, fast-drying paint, glue, catalytic adhesive bonding, rapid thawing, shrink PVC for packaging, seal wax patterning, DIY handmade soap or candle. ?1. Please DO NOT use more than 10 minutes continuously to prevent overheated ?2. Please DO NOT let the child alone use heat gun. ?3.This kind of gun can not adjust the temperature. ?4.Please DO NOT touch the hot nozzle. ?5.Do not blow the item directly at 90° with a heat gun. ?6.Hot air gun single-use time is generally 2-3 minutes ?7.Hot air gun air outlet is recommended to distance from heating items 5-6 cm