Sign In
Password
Forgot password?
New to ShopGlobal? Sign Up
Authentic products | Secure payments | Singapore support | Doorstep delivery | Trusted by Millions of Customers Worldwide Since 2015 | No Hidden Customs Taxes and DutiesAuthentic products | Secure payments | Singapore support | Doorstep delivery | Trusted by Millions of Customers Worldwide Since 2015 | No Hidden Customs Taxes and Duties
→
HUMBE&CO - Save Trees, Save Earth 12V W1209 Thermostat Module Digital Temperature Controller With Led Display And Ntc Sensor- (W1209 Pack Of 1 Pcs)
Product Overview
w1209 temperature controller useful for variaus applcations like incubator, as well as other same type apps Use Connect the power supply and equipment, to the controller power supply, as measured temperature is displayed, press the SET button, the display temperature flashes, press "+" "-" to set the desired temperature (hold down the button 5 seconds more quickly lift). After setting press SET to confirm return, then the controller according to the set temperature automatically execute the relay off!
Product Details
DETAILS OF PRODUCT :- Temperature Control Range(°C): -50 to +110
Resolution @-9.9°C to +99.9°C: 0.1°C
Resolution @all temperatures: 1°C
Accuracy: 0.1°C
Refresh Rate(s): 0.5
Supply Voltage(V): 12
Measuring Inputs: NTC10K
Output Type: 1 Channel Relay Output
Capacity: 10A
Long pressing “+/-” will reset all values to their default
LED display
Inbuilt embedded micro-controller
NTC temperature sensor
No programming knowledge required
Onboard relay
Display current temperature
3 digit 7 segment display W1209 digital temperature controller module with display and NTC Waterproof Temperature Sensor is a 12V Temperature controller with 7-segment display. It has a 3 switch keypad for setting temperature and other parameters. The module features an NTC thermistor temperature sensing and has an accuracy of 0.1 C.
USED FOR automation in poultry incubator and other same type applications
Use Connect the power supply and equipment, to the controller power supply, as measured temperature is displayed, press the SET button, the display temperature flashes, press "+" "-" to set the desired temperature (hold down the button 5 seconds more quickly lift). After setting press SET to confirm return, then the controller according to the set temperature automatically execute the relay off!
Cooling mode: the first power on, if the current temperature ≥ set value + return difference when the chiller does not start cooling immediately after the need to run the set delay time to start. Heating mode: the first power on, if the current temperature ≤ set value - the difference between the time back, the heater does not start heating immediately after the need to run the set delay time to start.
