Aerol Sportz Treadmill Lubricant is Silicone based aerosol preparation. It contains a combination of silicone fluids, high molecular weight polymers and other additives. It keeps the running deck of treadmills lubrications and also keeps the belt free from wear and tear. Benefits: Highly adhesive to both belt and deck which ensures longer lubricant life. Free from Chlorinated solvents that affect rubber. Contains a penetrating conditioner that keeps rubber belts soft and supple. Does not over-lubricate cause ‘slip’ in the belt. Does not creep or flow out of the belt. Maintains the torque of the motor. Does not dry off easily. Maintains its consistency under conditions of heat generated by belt friction. Directions to Use: Break open the seal and fix the pipe in the nozzle. Keep the can upright and maintain full pressure on the trigger while spraying. Spay from a distance of approximately 12 inches. APPLICATION: Lift the side of the walking belt and position the spray nozzle between the walking belt and the board. Spray evenly all over. Repeat this on the other side of the belt. Allow the silicone to ‘set’ for a few minutes before using the treadmill.